HV/MV Equipment
Dead Tank Circuit Breakers

Home > HV/MV Equipment > Circuit Breakers > Dead Tank Circuit Breakers

Related Links
  Circuit Breaker 3D Explorer
  DTCB Overview Video
  Circuit Breaker Overview
  Circuit Breaker Monitoring
  Circuit Breaker Services
  Asset Management
 
  
DT1-245P 63
Dead Tank Circuit Breaker for 245 kV / 63 kA
State-of-the-Art Technology

GE’s DT series of dead tank circuit breakers are characterized by advanced self-blast interrupters, leak-resistant, cast aluminum enclosures and durable, low-energy spring-operated mechanisms. More than 100,000 circuit breakers with self-blast interrupters and FK spring-operated mechanisms have been in service since 1989.

Field-Proven Reliability

The DT1-245P 63 is available for single pole or for the three-pole gang operation. By utilizing tank heaters, the DT1-245P 63 can be installed in regions with temperatures as low as -60 °C. The field-proven interrupter chamber with double-motion technology utilizes the energy-optimized, self-blast principle which dramatically reduces the mechanical stress in the chamber, enabling a higher interrupting capability with a lower operational energy requirement.

GE Advantage
Features
Specifications
Drawings

Learn about GE’s advantages in dead tank circuit breaker technology

Spring-Spring-Operated Mechanism

The reduced energy requirements within the breaking chamber allows for the utilization of GE’s world class FK spring-spring mechanism. The combination of the proven FK drive mechanism and interrupter technology results in a significant reduction of reaction forces, thereby reducing foundation design requirements.

SF6-Gas Tightness Guarantee

GE leads the industry in SF6 gas tightness testing technology including seals, castings, and plumbing systems. Each breaker is factory tested using GE’s proprietary gas tightness testing system which provides measurable, quantifiable test results on the breaker in its fully assembled, as-shipped condition.

Certified Quality

GE designs, manufactures, tests and delivers its circuit breakers in accordance with the latest IEEE/ANSI and IEC standards, maintaining a quality assurance system according to ISO 9011 and ISO 14001 certifications.

Superior Manufacturing & Domestic Content

The center of excellence for dead tank circuit breakers is located in Charleroi, PA (USA), where dead tank circuit breakers up to 550 kV and live tank circuit breakers up to 800 kV are assembled. The production lines feature high degree of domestic content, which can help to facilitate compliance with national requirements. In addition, the complete wiring and assembling of low voltage control cabinets and mechanism cabinets is done locally, resulting in greater flexibility to respond to utility needs.

Simplified Installation and Maintenance

The DT1-245P 63 model is factory tested and prepared for shipment with bushings assembled and prefilled with SF6 gas. As a result, the on-site installation requires only a few simple steps without requiring any special tools. The DT1-245P 63 circuit breaker range has lower maintenance costs and requirements owing to an engineering and design philosophy that has focused on these key needs since the inception of the development process.

Specifications

IEEE/ANSI Value Units
Rated voltage 245 kV
Rated continuous current 3,000/4,000/5,000 A
Rated frequency 60 Hz
Rated dielectric withstand (< 1,000 m)
- Power frequency 1-min dry
- Chopped wave (1,2/50 µs impulse wave)
- Full wave withstand

460
1,160
900

kV
kV (peak)
kV (peak)
Rated short-circuit current 63 kA
Rated short-circuit making current 164 kV (peak)
Rated line/cable charging breaking (Class C2)
Rated shunt capacitor breaking capacity (Class C2)
400k = 1.4
1,200k =1.4
A
A
Rated interrupting time 2 cycles
Rated operating sequence O-0.3s-CO-15s-CO kA
Temperature range (without heaters) -30 / +40 min / max °C
*Special purpose, high TRV, high X/R or other rating requirement are available on request. Please contact GE.

Drawings

DT1-145 63